FORKLIFT ELECTRONICS
GE
Sentry for Windows Software
*
VERSION
4.07.00e Now available
GE Sentry is designed to
enable the user to have complete access to the
ZX and Gen II family of
controllers. Through the use of an INTERFACE
CABLE,
and Laptop or PC, you can
connect directly to the controller
and link to the microprocessor
within
the control unit.
GE Sentry Provides the following:
| 1. The ability to log on to
the microprocessor and confirm software ID and Revision level. 2. The ability to read complete function settings from the control unit. 3. The ability to read the last 16 stored faults, including hour meter reading and battery condition at the time of the fault. 4. The ability to change, save, and download settings to the control unit. 5. The ability to monitor and display data in a graphical format emulating an oscilloscope 6. The ability to import/export one or more complete function libraries 7. And Much More! |
PLEASE NOTE:
The copy of GE Sentry is provided directly from General
Electric, for Distribution.
Forklift Electronics has been told it is
not
the final version and may still not function in 100%
of the applications used. For this reason we
are
supplying this Software at no charge,
with any CD-ROM purchase. The Software comes
with
a complete Users Help Menu .
The Software is supplied
without any saved data files.
System Requirements:
MS Windows 95/98/2000
MS Windows NT 4.0/ Service Pack 5.0
True DB9 Serial Port, will not work with most USB Converters
System must have a pentium Processor or at least run at the speed of a
Pentium.
System must have a minimum of 64 mb of RAM.
* GE Sentry for Windows Software is a registered trade mark of GE Industrial Systems
Fast Menu
Forklift Electronics
Robert Meyers
12/07